Before installation, please close the cold and hot water valves below the sink to prevent water leakage.
If you are replacing an old faucet, first remove all the pipes, loosen the fixing nuts and remove the old faucet.
Then insert the new faucet into the hole reserved in the sink and install the fixing nuts from the bottom to ensure stability.
Next, connect the water supply pipe to the faucet and the stop valve to ensure all connections are secure. Do not twist the pipes to avoid subsequent leakage.
After assembly is completed, slowly open the faucet and let the water flow for a while.
Carefully check each joint for any leakage. If there is no dripping, it indicates a successful installation.
